|
- 100% Pure Beeswax
- Ridiculously long burn times
- Clean burning and non-toxic
- Comes with burn care instructions
- Cotton wick - no lead or metal
2” Dia. Pillars:
- Trim wick to 1/4" before each lighting.
- To avoid dripping, burn for only 1-2 hours at a time.
- To eliminate smoke when extinguishing the flame, use a tool to drip wax from the molten pool onto the burning wick.
3” Dia. Pillars:
- Trim wick to 1/4" before each lighting.
- To avoid tunneling, burn for at least 3 hours per burn and mold the warm sides in toward the flame. This will melt the walls, utilizing
all of the available fuel, and thus extend the overall burn time.It will also raise the molten wax level, and shrink any oversized flame.
- To prevent uneven burning and potential dripping,use a metal tool to redirect a curled or angled wick to the opposite direction. To
prevent wick breakage when doing this, be sure to nudge the wick below the level of the molten pool where the wick is not burned and thus stronger.
- To eliminate smoke when extinguishing the flame, use a tool to drip wax from the molten pool onto the burning wick.
4” Dia. Pillars:
- Trim wick to 1/4" before each lighting.
- To avoid tunneling, burn for at least 6 hours per burn and mold the warm sides in toward the flame. This will melt the walls, utilizing
all of the available fuel, and thus extend the overall burn time.It will also raise the molten wax level, and shrink any oversized flame.
- To prevent uneven burning and potential dripping,use a metal tool to redirect a curled or angled wick to the opposite direction. To
prevent wick breakage when doing this, be sure to nudge the wick below the level of the molten pool where the wick is not burned and thus stronger.
- To eliminate smoke when extinguishing the flame, use a tool to drip wax from the molten pool onto the burning wick.
|
|
|